Interlogix TruVision NVR 10 User Manual - Manual (Page 44)

Chapter 6: Alarm settings
38 TruVision NVR 10 User Manual
8. Select the response method to motion detection.
Click the Linkage Action tab to define the method by which you want the NVR to
notify you of the alarm. See “Description of alarm notification types” on page 35 for
the list of methods available.
Click Apply to save settings .
9. Click OK to return to the motion detection settings window.
10. Click Back to return to live view, or continue configuring the NVR settings.
Setting up system notifications
Setting up system notifications instructs the NVR to alert you when irregular events
(exception types) occur to the system, and how to alert you to the event.
You can quickly check the system status by looking at the status LEDs on the front
panel. When there is an irregular event with the system, a status icon appears on
screen to also alert you. See “Status information” on page 71 for further information.
The exception types available are:
• HDD Full: An installed HDD is full (overwrite option is disabled).
• HDD Error: Errors occurred while files were being written to the HDD, no HDD
installed or HDD had failed to initialize.
• Network Disconnected: Disconnected network cable.
• IP Conflicted: Conflict in the IP address setting.
• Illegal Login: Wrong user ID or password used.
• Record/Capture Exception. Recording or snapshot capture failed.
• PoE Power Overload: Permitted PoE power budget exceeded.