Interlogix TruVision NVR 10 User Manual - Manual (Page 58)

Chapter 7: Network settings
52 TruVision NVR 10 User Manual
3. Click Back to return to live view, or continue configuring the network settings.
Multicast setup
Setting up multicasting resolves limitation issues when streaming videos through a
network access device. A multicast address spans the Class-D IP range of 224.0.0.0 to
239.255.255.255. We recommend that the IP address range of 239.252.0.0 to
239.255.255.255 be used.
To set up multicasting:
1. From the menu toolbar, click Network Settings > More Settings .
2. Enter a Multicast IP address.
Note: When adding a device to the Network Video Surveillance software, the
multicast address must be the same as the NVR’s multicast IP.
3. Click Apply to save the settings.
4. Click Back to return to live view, or continue configuring the NVR settings.
Server and HTTP ports setup
You can change the server and HTTP ports from the default settings in the Network
Settings window. The default server port is 8000 while that of the default HTTP port is
80.
Note: The server port has a port range of 1024 to 65535 and is used for remote client
software access. The HTTP port is used for remote internet browser access.