Interlogix TruVision NVR 10 User Manual - Manual (Page 132)

Chapter 16: Using the web browser
126 TruVision NVR 10 User Manual
Menu Function Description
Network Settings General Define the general network settings. See “General
network settings” on page 45 for more information.
PPPoE Define the PPPoE settings. See “PPPoE” on page 46 for
more information.
DDNS Define the DDNS settings. See “DDNS” on page 47 for
more information.
Email Define the settings to send an email. See “Email” on
page 49 for more information.
UPnP Enable this function so that the NVR can automatically
configure its own port forwarding. See “UPnP” on page
50 for more information.
SNMP Define the SNMP settings. See “SNMP” on page 50 for
more information.
FTP Define the FTP settings. See “FTP server setup to store
snapshots” on page 50 for more information.
More Settings Define a remote alarm host, multicast IP as well as the
server, HTTP, and RTSP ports. See page 51 for more
information.
Alarm Settings Alarm Input Define the alarm input parameters for when an external
alarm is triggered. See “Setting up external alarms” on
page 39 for more information.
Alarm Output Define the response when an external alarm is triggered.
See “Setting up external alarms” on page 39 for more
information.
Advanced Settings Define the warning buzzer time. See “Modifying the
warning buzzer” on page 35 for more information.
Notification Define the notification parameters when irregular events
occur such as HDD full. See “Description of alarm
notification types” on page 35 and “Setting up system
notifications” on page 38
User Management Define, modify, and delete users. See Chapter 15 “User
management” on page 115 for more information.
HDD Management Basic Settings Define the HDD basic settings and Initialize the HDD.
See “Initializing HDDs” on page 57 for more information.
Storage Mode Define the storage mode of the HDD. See “Controlling
disk storage mode on the HDD” on page 57 for more
information.
S.M.A.R.T. Settings List the S.M.A.R.T. information on the HDD.
Maintenance Remotely update the NVR firmware, restore default
factory settings, restart the NVR, and import/export
parameters remotely. See Chapter 14 “NVR
management” on page 109 for more information.
System
Information Camera, Record,
Alarm, and Network Review the status of the cameras, recordings, alarms,
and network. See “Viewing system information” on page
110 for more information.