Interlogix TruVision NVR 10 User Manual - Manual (Page 84)

Chapter 10: Live view
78 TruVision NVR 10 User Manual
Changing the camera sequence
The cameras are sequenced in numeric order by default. You can change the
sequence order of the cameras for all monitors.
You can switch the channel of a camera with that of another camera in the system. This
lets you, for example, have the images of camera 1 appear on channel 10, and the
images of camera 10 appear on channel 1. This feature is useful when you want to
watch the sequence of images from specific cameras so that they are next to each
other on-screen.
See Figure 19 below. Each video tile displays both the order of the camera in the
sequence and the camera number.
Figure 19: Camera layout and sequence window
Multiview layout
selection bar
Camera order in the
sequence
Camera number
selection
To set the camera sequencing:
1. From the menu toolbar, click Display Mode Settings > Layout > View .
2. From Video Output Interface , select the desired monitor from the drop-down list.
3. From the multiview layout selection bar, select the desired multiview layout.
4. Select the video tile of the camera whose order you want to change. The selected
tile is highlighted green. Select the new camera sequence order by scrolling through
the list of available camera numbers.
Note: “X” means that the camera is not displayed.
5. Click Apply to save the settings.
6. Click Back to return to live view.