Interlogix TruVision NVR 10 User Manual - Manual (Page 26)

Chapter 4: Operating instructions
20 TruVision NVR 10 User Manual
Figure 5: IR remote control
Item Description
1. Alarm Acknowledge an alarm.
2. Device Enable/disable the IR remote control to control the TVN 10.
3. Numeric buttons Select a camera, and enter a number in a menu option.
4. Display Switch between the different multiviews.
5. Mon A and Mon B Switch between monitors A and B.
6. Live Return to live view mode.
7. Menu Activate the main menu.
8. Seq Start /stop sequencing.
9. , , , In Menu mode: Use left or right arrow buttons to select and up or down arrow
buttons to edit entry.
In PTZ mode: Use to control PTZ.
In Playback mode: Use to control playback speed.
10. OK Confirm selection.
11. Zoom + and - Use to control zoom of camera lens.
12. Preset Enter preprogrammed three-digit code to call up a preset.
13. Tour Enter preprogrammed one-digit code to call up a preset tour.