HP 250C - Manual (Page 46)

330
350C
5Ć4 Functional Overview C4699Ć90000
Loading Roll Media on the DesignJet 330 and 350C
The following diagram shows the Roll mediaĆloading sequence. The vertical arrows
represent movement of the media. The thick horizontal bars represent movement of the
carriage to sense the media edges.
1
2
3
4
5
6
7 8
9
10
11
12
13
During roll media loading, the plotter:
1 Grips and advances the media.
2 Moves the media forwards and backwards to check whether it is still present and
correctly gripped.
3 Advances the media and rechecks media presence. (The loading process fails if the media
sensor detects no media.)
4 Actuates the bail so that the media can advance under it.
5 Again moves the media forwards and backwards to check for its presence. (The loading
process fails if the media sensor detects no media.)
6 Advances the media several inches and rechecks media presence. (The loading process
fails if the media sensor detects no media.)
7 The plotter stops and allows you to realign the media.
8 Again moves the media forwards and backwards to check for its presence. (The loading
process fails if the media sensor detects no media.)
9 Moves the media backwards several inches.
10 Moves the carriage to sense the right and left edges and to check dimensions.
11 Advances the media several inches.