HP 250C - Manual (Page 105)

6Ć47 Removal and Replacement C4699Ć90000
Reinstalling the Overdrive
Enclosure
The order in which you replace the screws on
the overdrive enclosure is important.
C A U T I O N
Take care not to damage the mediaĆsensor
flags. The overdrive enclosure should not
touch them.
1 Replace the two indicated screws. (Short
dogĆpoint screws.)
Torx-15
1
Torx-15
2
2 Insert the two indicated screws, but do
not tighten them. (Long dogĆpoint
screws.)
Torx-15
3
Torx-15
4
3 Replace the indicated screw and tighten
it, thus aligning the overdrive enclosure
with the left sideĆplate.
Torx-15
5
4 Tighten the screws you inserted in step2.