HP 250C - Manual (Page 246)

GlossaryĆ4 C4699Ć90000
KanjiąA Japanese character set.
KbyteąKilobyte
kgąKilogram(s).
KgąKilogram(s).
LANąLocal Area Network.
lbąPound(s).
LEDąLightĆEmitting Diode.
line sensorąCarriage LED.
mąMeter(s)
marginąPart of the media on which the
plotter is incapable of printing.
MbyteąMegabyte.
mediaą(Used instead of medium.) The
material on which the graphics are plotted:
paper, translucent material, vellum, film, or
special paper.
media axisąThe axis along which the
media moves. (XĆaxis; paper axis.)
media jamąA situation in which media
becomes blocked in the plotter mechanisms.
mediaĆjam leverąPinchĆarm lever.
mediaĆlength calibrationąMediaĆsensor
calibration.
mediaĆsensor calibrationąMediaĆlength
calibration.
milą1/1000 of an inch.
minimum pass timeąThe time necessary
for ink to dry sufficiently before the plotter
can place more ink adjacent to it.
MIOąModular Input/Output.
mmąMillimeter(s).
monitor modeąService monitor.
MSĆDOSąMicroSoft DiskĆOperating
System
no negative motionąAn RTL command
that indicates to the plotter that it will
receive all data already in the order in
which it should be plotted.
offĆaxis ink systemąA system whereby
ink is pumped to the cartridges from a
reservoir that does not move with the
carriage.
PALąProgrammable Array Logic.
paletteą A set of pens for which width and
% shading are defined using the setup sheet
or the graphics software.
paper axisąMedia axis (XĆaxis).
parityąAn errorĆchecking method for
information transfer between a computer
and a peripheral device. Parity is used to
check the accuracy of binary data.
passąA movement of the carriage from left
to right, or from right to left, as it plots the
graphic.
pass advanceąThe distance that the
media advances between carriage passes.