HP PN1050 User Manual
Page 81
ENWW
Security Features 81
Table 5.1
Summary of HP Jetdirect Security Features (1 of 2)
Secure Embedded Web Server Management
●
A preinstalled, self-signed digital certificate provides HTTPS (secure HTTP)
access to the embedded Web server from your Web browser. HTTPS (secure
HTTP) provides secure, encrypted communications with your browser.
●
Digital certificates issued by a trusted third party can be installed on the
projector server, allowing it to be configured as a trusted site.
●
Using HTTPS, the embedded Web server provides configuration and
management of network parameters and protocols through a secure channel.
●
An HP Jetdirect Security Configuration Wizard provides an easy-to-use
interface to configure security settings.
●
Projector servers can be configured with EAP/802.1X server-based
authentication.
Network Protocol Control
●
Device discovery and management protocols on the HP Jetdirect projector
server can be enabled or disabled. By disabling unused or unnecessary
protocols, unauthorized access through applications that use these protocols
can be prevented.
●
Protocols may be enabled or disabled through the embedded Web server and
HP Web Jetadmin.
IP Administrator Password
●
Used by HP Web Jetadmin and the embedded Web server to control access
to HP Jetdirect configuration parameters.
●
Up to 16 alphanumeric characters may be used.
●
Configured on the HP Jetdirect projector server using TFTP (
), the
embedded Web server (
) services, or HP Web Jetadmin. Up to 16
alphanumeric characters are allowed.
●
If configured through the embedded Web server, may be synchronized as the
SNMP Set Community Name used in HP Web Jetadmin SNMP v1/v2c Set
commands.
●
Cleared by cold reset of the projector server to factory default settings.
IP Access Control List
●
Specifies up to 10 host systems, or networks of host systems, that are allowed
access to the HP Jetdirect projector server and the attached network device.
●
Access is generally limited to host systems specified in the list.
●
By factory default, host systems that use HTTP (for example, using the
embedded Web server) are not checked against entries in the Access List and
are allowed access. However, HTTP host access can be disabled through the
embedded Web server.
●
If the list is empty, then all hosts are allowed access.
●
Configured on the HP Jetdirect projector server using TFTP (
),
embedded Web server (
), or management software.