HP xp7010/xp7030 User Manual
HP Projectors
This manual is related to the following products:
Table of contents
Document Outline
- HP xp7010/xp7030 Series Digital Projector User's Guide
- Contents
- Safety precautions 6
- What’s in the box? 7
- Identifying common features 8
- Setting up the projector 13
- Turning the projector on and off 23
- Making basic adjustments 25
- Using the remote control 26
- Showing a computer screen 28
- Selecting a different source 28
- Hiding or showing the picture 28
- Adjusting the picture and sound 29
- Using the on-screen menu 34
- Performing routine maintenance 39
- Upgrading the projector 43
- Installing the projector 44
- Connecting to a room controller 47
- Troubleshooting suggestions 55
- Testing the projector 60
- Specifications 61
- Safety information 64
- Regulatory information 64
- Recycling information 67
- Setting Up
- Showing Presentations
- Adjusting the Projector
- Maintaining the Projector
- Installing Permanently
- Fixing Problems
- Troubleshooting suggestions
- Warning light problems
- Start-up problems
- Picture problems
- If a “scanning” or “waiting” message is displayed on a blank screen:
- If the wrong input source is displayed:
- If the image is out of focus:
- If an upside-down or reversed image is displayed:
- If the image is too small or too large:
- If the image has slanted sides:
- If the image is stretched:
- If the projected colors seem slightly wrong:
- If the projected colors seem completely wrong:
- If the picture is not clear (ghost images, smearing, poor quality):
- If several picture settings seem completely wrong and you cannot fix them:
- If a scrolling or cut-off image is displayed for a computer connection:
- If the image is flickering or unstable for a computer connection:
- If the image disappears from the computer screen:
- If text or lines from a computer display seem rough or uneven:
- Sound problems
- Interruption problems
- Remote control problems
- Testing the projector
- Troubleshooting suggestions
- Reference
- Index