HP PN1050 User Manual
Page 63
ENWW
Using the Embedded Web Server 63
Custom Security
This option proceeds through all available security settings
supported by your projector server. For more information on
specific parameters and selections, see the tabs on the
, and
menu pages under SECURITY.
The Administrator Account page is used to enter the
administrator password.
The Web Mgmt. page is used for HTTPS (secure HTTP)
configuration, including certificates and encryption levels.
The Management Tools page allows configuration of
management protocols that are not secure (such as FTP
firmware updates).
SNMP Configuration pages are used to configure specific
SNMP settings:
●
Enable SNMPv1/v2: Enable this option to allow
management software that use SNMP v1/v2. If selected
the SNMPv1/v2 Configuration page is displayed to
configure SNMP community names.
●
Enable SNMPv3: Enable this option to create an SNMP
v3 account. Creating an SNMP v3 account is not
recommended if you manage devices using HP Web
Jetadmin. See
.
The Access Control page is used to set up an Access
Control List, if desired to control host access to the device.
The Protocols and Services page is used to enable or
disable network services, and device discovery protocols
that may affect security.
The 802.1x Authentication page configures the server as
required for client authentication on your network.
The Configuration Review page displays all the current
settings that may affect security. Click Finish to set your
basic security selections.
Table 4.6
Wizard Security Levels (2 of 2)
Security Level
Description