HP PN1050 User Manual
Page 19
ENWW
TCP/IP Configuration 19
The BOOTP reply may contain the name of a configuration file containing
enhanced configuration parameters. If the HP Jetdirect projector server finds
such a file, it will use TFTP to download the file and configure itself with
these parameters. For a description of entries, see “
.” Configuration parameters retrieved through TFTP are optional.
Note
HP recommends that the BOOTP server be located on the
same subnet as the projectors it serves. BOOTP broadcast
packets may not be forwarded by routers unless the
routers are properly configured.
Bootptab File Entries
An example of a /etc/bootptab file entry for an HP Jetdirect projector
server is provided below:
Note that the configuration data contains “tags” to identify the various
HP Jetdirect parameters and their settings. Entries and tags supported by the
HP Jetdirect projector server are listed in
picasso:\
:hn:\
:ht=ether:\
:vm=rfc1048:\
:ha=0001E6123456:\
:ip=192.168.40.39:\
:sm=255.255.255.0:\
:gw=192.168.40.1:\
:lg=192.168.40.3:\
:T144=“hpnp/picasso.cfg”: