Other settings – HP PN1050 User Manual
Page 57
ENWW
Using the Embedded Web Server 57
Other Settings
This item provides access to a variety of management and configuration
options. The following tabs are provided:
●
: for enabling miscellaneous advanced protocols and
functions
●
: to update your HP Jetdirect projector server with new
features and enhancements
●
: to set up the Support link located under Other Links in the
left margin
●
: to set the time interval (in seconds) for embedded Web
diagnostic page updates
Disable SNMPv1/v2
This option disables the SNMP v1/v2c agents on the
projector server, which is recommended for secure
environments. If SNMP v1/v2c is disabled, some discovery
utilities may not operate properly.
Enable SNMPv3
This option enables (check) or disables (clear) the SNMP
v3 agent on the projector server.
When enabled, an SNMP v3 account must be created on
the server, and the account information must be
implemented on the SNMP v3 management application.
You may create an account by providing the following
information:
User Name: the SNMP v3 account user name.
Authentication Key: a 16-byte hexadecimal value for
authenticating the SNMP packet contents using the
Message Digest Algorithm 5 (MD5, RFC 1321).
Privacy Key: a 16-byte hexadecimal value for encrypting
the data portion of the SNMP packet using the Data
Encryption Standard (DES) algorithm.
Context Name: the view context in which this user can
access SNMP objects. It is always “Jetdirect”.
Table 4.4
SNMP Settings (2 of 2)
Item
Description