HP PN1050 - Manual (Page 67)

ENWW Using the Embedded Web Server 67
Create Certificate Request. Using this option, you are prompted for specific
device and organizational information in the following screen:
● Certificate Information
This option may be used, for example, when an authentication protocol requires
that a Jetdirect certificate issued by a trusted third party or Certificate Authority
be installed.
Install Certificate. This option is displayed only if there is a Jetdirect certificate
request (to a trusted third party) pending. When received, the certificate is installed
using this option. Once installed, this certificate overwrites the preinstalled
certificate.
Using this option, you are prompted for information in the following screen:
● Install Certificate
The certificate to be installed must be associated with a previous certificate
request generated by the embedded Web server.
Install CA Certificate. This option is provided when you click Configure for a
CA certificate, which must be installed for selected authentication protocols. Using
this option, you are prompted for information in the following screen:
● Install Certificate
Import Certificate and Private Key. This option allows you to import a previously
acquired and known certificate as the Jetdirect certificate. If you import a
certificate, the currently installed certificate will be overwritten. Using this option,
you are prompted by the following screen:
● Import Certificate and Private Key
Export Certificate and Private Key. This option allows you to export the Jetdirect
certificate currently installed on the projector server for use on other projector
servers. Using this option, you are prompted by the following screen:
● Export the Jetdirect certificate and private key
Delete CA Certificate. This option is used to remove the CA certificate installed
on the Jetdirect projector server. This option appears when a CA certificate for
EAP authentication has been installed.
CAUTION: If the CA Certificate is deleted, EAP authentication will be disabled
and network access will be denied.
The CA Certificate will also be removed on a cold-reset of the server, where
factory-default settings are restored.
Table 4.7 Certificate Configuration Screens (2 of 4)