HP PN1050 User Manual
Page 22

ENWW
TCP/IP Configuration 22
T146
--
Buffer Packing option. An HP-proprietary tag to set buffer
packing for TCP/IP packets.
0 (default): Normal data buffers are packed before sending
to the projector.
1: Disable buffer packing. Data is sent to the projector
when received.
T147
--
Write Mode option. An HP-proprietary tag that controls the
TCP PSH flag setting for device-to-client data transfers.
0 (default): disables this option, flag not set.
1: all-push option. The push bit is set in all data packets.
T148
--
IP Gateway Disable option. An HP-proprietary tag to
prevent configuration of a Gateway IP address.
0 (default): allows an IP address.
1: prevents a Gateway IP address to be configured.
T149
--
Interlock Mode option. An HP-proprietary tag that specifies
whether an acknowledgement (ACK) on all TCP packets
is required before the projector is allowed to close a Port
9100 connection. A Port Number and Option value are
specified, in the form:
<Port Number> <Option>
<Port Number>: For supported HP Jetdirect projector
servers, the Port Number is 1 (default).
<Option>: Option value 0 (default) disables interlock, 1
enables.
Example: 1 1 specifies
T150
--
TFTP server’s IP address option. An HP-proprietary tag to
specify the TFTP server’s IP address where the TFTP
configuration file is located.
T151
--
Network Configuration option. An HP-proprietary tag to
specify either “BOOTP-ONLY” or “DHCP-ONLY” requests
be sent.
Table 3.1
Tags Supported in a BOOTP/DHCP Boot file (3 of 3)
Item
RFC
2132
Option
Description