HP PN1050 User Manual
Page 51
ENWW
Using the Embedded Web Server 51
System Up Time
The length of time since either the HP Jetdirect projector
server or the network device was last powered off/on.
System Contact
A text string (stored on the HP Jetdirect projector server)
for the name of a person to contact for this device. See
TCP/IP on the
.
System Location
A text string (stored on the HP Jetdirect projector server)
that identifies the physical location of this device. See the
Networking TCP/IP configuration pages.
HP Jetdirect
The product number of the HP Jetdirect projector server
(for example HP L2130A).
Firmware Version
The versions of the operating instructions installed on the
HP Jetdirect projector server.
IP Address
The Internet Protocol address configured on the
HP Jetdirect projector server. For general information on
IP addresses, see
.
Hardware Address
The LAN hardware (or MAC, Media Access Control)
address of the HP Jetdirect projector server. This unique
address is assigned by Hewlett-Packard, but can be locally
administered.
LAA
A Locally Administered Address (LAA) that replaces the
LAN Hardware (MAC) address. The LAA may be
configured under local control by a network administrator.
By default, the LAA is the factory-assigned LAN Hardware
address.
Admin Password
Specifies whether or not an administrator password has
been set. This password may also be configured from HP
Web Jetadmin.
Use the Admin Password page to set or clear
administrator passwords.
If an administrator password has been set, you will be
prompted for a User Name and Password to access
network parameters. For more information, see “
.”
Table 4.1
HP Jetdirect Home Page Items (2 of 2)
Item
Description