Snmp v3 – HP PN1050 User Manual
Page 72
ENWW
Using the Embedded Web Server 72
Note
Cipher suites support different levels of encryption strength.
The cipher suites currently supported for encryption and
decryption are DES (Data Encryption Standard, 56-bit),
RC4 (40-bit or 128-bit), and 3DES (168-bit).
SNMP
Use this tab to enable or disable SNMP v1, v2c and v3 agents on the server.
For a description of SNMP selections, see
SNMP v3. HP Jetdirect projector servers include an SNMP v3 (Simple
Network Management Protocol, version 3) agent, for enhanced SNMP
security. The SNMP v3 agent employs a User-based Security Model for
SNMP v3 (RFC 2574), which features user-authentication and data privacy
through encryption.
The SNMP v3 agent is enabled when an initial SNMP v3 account on the server
is created. Once the account is created, any SNMP management application,
if properly configured, can access or disable the account.
CAUTION
If you use HP Web Jetadmin to manage your devices, you
should use HP Web Jetadmin to seamlessly configure
SNMP v3 and other security settings on the projector server.
Using the embedded Web server to create the SNMP v3
account will erase any existing SNMP v3 accounts. In
addition, the SNMP v3 account information will need to be
implemented on the SNMP management application.
You may create the initial account by specifying the HMAC-MD5
authentication and CBC-DES data privacy encryption keys used by your
SNMP v3 management application.