HP PN1050 - Manual (Page 76)

ENWW Using the Embedded Web Server 76
Network Statistics
This page is used to display counter values and other status information
currently stored on the HP Jetdirect projector server. This information is often
useful to diagnose performance and operational problems associated with the
network or network device.
Protocol Info
This page provides a list of various network configuration settings on the
HP Jetdirect projector server for each protocol. Use these lists to validate your
desired settings.
Authentication
Behavior:
Reauthenticate on
Apply Enable (check) or disable (clear) this checkbox to control
authentication when you click Apply on this page,
assuming valid configuration entries have been made.
Note: This parameter does not apply to security or other
configuration wizards. Changes to parameters through
a wizard will always cause the server to reauthenticate.
If disabled (default), the server will not attempt
reauthentication unless configuration changes cause the
server to disconnect and reconnect to the network.
If enabled, the server will always try to reauthenticate using
the configuration values set.
Table 4.9 802.1X Configuration Settings (2 of 2)
Item Description