HP PN1050 - Manual (Page 49)

ENWW Using the Embedded Web Server 49
3. If prompted with security alerts, click Yes to proceed.
For initial access, the embedded Web server uses standard HTTP.
However, it can be configured to appear as a secure site, using an
X.509-compliant certificate installed on the projector server for
identification. When properly configured, encrypted browser
communications through HTTPS (secure HTTP) may be used for secure
access.
Although not recommended, you can use your Internet Options menu to
configure your browser to ignore security warnings if the projector server
is configured to operate through HTTPS. See “
Mgmt. Protocols .”
4. An embedded Web server page will be displayed.
Operating Notes
● If you enter or change a configuration parameter value, click Apply to
enable your change, or click Cancel to erase your change.
● Changes to the IP address will close the connection to the embedded Web
server. To re-establish a connection, use the new IP address.