HP PN1050 - Manual (Page 35)

ENWW TCP/IP Configuration 35
8. Skip this step if you have assigned unlimited leases in the previous step.
Otherwise, select Scope and select Add Reservations to set up your
projectors as reserved clients. For each projector, perform the following
steps in the Add Reserved Clients window to set up a reservation for that
projector:
a. Type the selected IP address.
b. Obtain the MAC address or hardware address from the label on the
server, embedded web server, or on-screen Help menu, and type this
address in the Unique Identifier box.
c. Type the client name (any name is acceptable).
d. Select Add to add the reserved client. To delete a reservation, in the
DHCP Manager window, select Scope and select Active Leases.
In the Active Leases window, click on the reservation you want to
delete and select Delete.
9. Select Close to return to the DHCP Manager window.
10. Skip this step if you are not planning to use WINS (Windows Internet
Naming Service). Otherwise perform the following steps when
configuring your DHCP server:
a. From the DHCP Manager window, select DHCP Options and
select one of the following:
Scope — if you want Name Services only for the selected scope.
Global — if you want Name Services for all scopes.
b. Add the server to the Active Options list. From the DHCP Options
window, select WINS/NBNS Servers (044) from the Unused
Options list. Select Add, then select OK.
A warning may appear requesting that you set the node type. You
do this in step 10d.