HP A9834-9001B - Manual (Page 84)

Chapter 3
Installing the System
Unpacking and Inspecting the System
84
Step 7. Remove the plastic anti-static bag by lifting it straight up off the cabinet. If the cabinet or any
components are damaged, follow the claims procedure. Some damage can be repaired by replacing
the damaged part. If extensive damage is found, it may be necessary to repack and return the
entire cabinet to HP.
Inspecting the Cabinet
Inspect the cabinet exterior for signs of shipping damage.
Step 1. Look at the top and sides for dents, warpage, or scratches.
Step 2. Verify that the power supply mounting screws are in place and locked (Figure 3-6).
Figure 3-6 Location of Power Supply Mounting Screws
Power supply
mounting screws
Power supplies