Mp command: nd, Nd - network diagnostics, Access level—administrator – HP A9834-9001B User Manual
Page 194: Scope—complex, Exampleb17 nd command, Sample 1
Appendix B
Management Processor Commands
MP Command: ND
194
MP Command: ND
ND - Network Diagnostics
•
Access level—Administrator
•
Scope—Complex
This command enables/disables network diagnostics. This will enable or disable the Ethernet access to MP
Ethernet ports other than the main telnet port (TCP port 23). Disabling the network diagnostic port prevents
the user from accessing the system with diagnostic tools such as JUST, GDB, LDB and firmware update
(FWUU).
Example B-17
ND Command
• Sample 1:
MP:CM> nd
Network diagnostics are currently enabled.
Do you want to disable network diagnostics? (Y/[N]) y
-> Network diagnostics are disabled.
MP:CM>
• Sample 2:
MP:CM> nd
Network diagnostics are currently disabled.
Do you want to enable network diagnostics? (Y/[N]) y
-> Network diagnostics are enabled.
MP:CM>
• See also: DC