Mp command: sysrev, Access level—single partition user, Scope—complex – HP A9834-9001B User Manual
Page 206: Example
Appendix B
Management Processor Commands
MP Command: SYSREV
206
MP Command: SYSREV
SYSREV - Display System and Manageability Firmware Revisions
•
Access level—Single Partition User
•
Scope—Complex
This command will display the firmware revisions of all of the entities in the complex.
• Example:
MP:CM> sysrev
Manageability Subsystem FW Revision Level: 7.14
| Cabinet #0 |
-----------------------+-----------------+
| SYS FW | PDHC |
Cell (slot 0) | 32.2 | 7.6 |
Cell (slot 1) | 32.2 | 7.6 |
Cell (slot 2) | 32.2 | 7.6 |
Cell (slot 3) | 32.2 | 7.6 |
Cell (slot 4) | | |
Cell (slot 5) | | |
Cell (slot 6) | | |
Cell (slot 7) | | |
| |
MP | 7.14 |
CLU | 7.6 |
PM | 7.12 |
CIO (bay 0, chassis 1) | 7.4 |
CIO (bay 0, chassis 3) | 7.4 |
CIO (bay 1, chassis 1) | 7.4 |
CIO (bay 1, chassis 3) | 7.4 |
MP:CM>
• See also: PS