Huawei DR814Q - Manual (Page 82)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
5 Advanced Configuration
77
Caution:
z Make ensure that ZIPB is disabled before you change the ZIPB configuration.
Change the configuration, and then click . The new configuration will take
effect after you enable ZIPB.Any change on the configuration takes no effect when
the ZIPB is enabled.
z Configuration changes on ZIPB will not be saved, and so you need to reconfigure it
whenever the router restarts. That is, make the previous ZIPB host obtain the IP
address again through DHCP, and then specify a new ZIPB host from the
drop-down list
z You can enable ZIPB only for two WAN services: PPPoE and PPPoA.
5.5.3 SNMP
The DR814Q supports simple network management protocol (SNMP) proxy function,
exchanging SNMP information with the network management sites through SNMP.
Figure 5-42 SNMP Client Setting page
You can create an SNMP community in Figure 5-42 and this community will be
displayed in the community list. The DR814Q authenticates the SNMP packets
according to the defined information in the list.