Huawei DR814Q - Manual (Page 78)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
5 Advanced Configuration
73
Figure 5-37 Create a route
Caution:
For DHCP or Static IP services, you must type in the next hop address in the [Gateway]
filed (you cannot leave it blank), while you can set the [Interface] drop-down list to the
default (None) or other value.
For other services (IPoA, PPPoA, and PPPoE), you can specify a value of either the
interface or the gateway. If both of them are specified, only the interface value takes
effect.
Example: Figure 5-38 illustrates a physical connection that requires static routes.