Huawei DR814Q User Manual
Page 59
User Manual
Aolynk DR814Q ADSL2+ Broadband Router
5 Advanced Configuration
54
To add a public IP address or an address pool, click
enter the configuration page as below.
Figure 5-14 Add a global IP address pool
Table 5-2 Description on the items of the global IP address pool
Item
Description
Interface Type
Select the interface type corresponding to a public IP address from
the drop-down list.
Use Subnet
Configuration
Select the method to specify the address from the drop-down list.
The Use Subnet Mask option indicates to specify a network
segment. The Use IP Address Range option indicates to specify a
range of the IP address.
IP Address
Type in the IP address of a segment if the Use Subnet Mask
option is selected. Type in the start IP address if the Use IP
Address Range option is selected.
Subnet
Mask/IP
Address2
Type in the subnet mask of the segment if the Use Subnet Mask
option is selected. Type in the end IP address if the Use IP
Address Range option is selected.
Click
will be added to the address pool.
2) Virtual
server
After NAT is enabled, the internal network devices cannot be accessed from the
Internet. To provide public services such as Web server, Email and FTP for the outside,
a virtual server needs to be configured to make the network computer with private static
IP address provide these services. Although the internal service address cannot be
accessed by external users directly, the DR814Q can identify service requests through
port number and forward them to the virtual server.
To configure a virtual server, click
Mappings] section (see Figure 5-13) to enter the page as below.