Remote access, 2 remote access – Huawei DR814Q User Manual
Page 37
User Manual
Aolynk DR814Q ADSL2+ Broadband Router
4 Web-based Basic Configuration
32
To change the password, type in the related information in the [Old Password], [New
Password] and [Confirm Password] text boxes, and then click
4.4.2 Remote Access
If remote access is enabled, you can view the current configuration page and manage
the DR814Q remotely.
By default, the remote access is enabled and the idle timeout time is set to 0 (see
Figure 4-27). In this case, remote access is kept alive.
Figure 4-27 Remote access page – remote access enabled
Figure 4-27 indicates the port for remote management is 8000, so you can manage the
DR814Q remotely by entering http://xxx.xxx.xxx.xxx:8000 in your Web browser. The
xxx.xxx.xxx.xxx is the IP address of the WAN port on the DR814Q. If multiple WAN
services are configured and all of them obtain the IP addresses, the IP address of any
service can be used for remote access.
To disable the remote access, click
the page as below.
Figure 4-28 Remote access page – remote access disabled
In this case, you can set the idle timeout time to a desired value other than 0 in the text
box on the page. Thus, when you click