Huawei DR814Q - Manual (Page 17)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
4 Web-based Basic Configuration
12
re are multiple PPPoE servers in the network, you can specify the PPPoE
server identifier through which the PPPoE client accesses in the [PPPoE Access
When the
concentrator] text box.
Click after the configuration is complete.
II. DHCP
you can obtain IP addresses from your ISP’s DHCP server automatically, select the
DHCP option on the [Quick Start] page (see Figure 4-1) and type in the VPI
pecified by your ISP on the page (see Figure 4-2).
Figure 4-2 Quick Setup – No Login/DHCP
If
No Login/
and VCI values s
Click after the configuration is complete.
Caution:
Do not set the same VPI and VCI values for DHCP and PPPoE login types.
4.2 WAN Setup
Click [WAN Setup] in the navigation bar to enter the corresponding page on which three
4.2.1 WAN
This page allows you to set WAN connections in detail, or to modify the service
attributes. You can access the Internet normally only when these attributes are set
correctly.
tabs are available: WAN, DNS Relay, and DDNS. Click the desired tab to enter its
configuration page.