Huawei DR814Q - Manual (Page 20)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
4 Web-based Basic Configuration
15
2) IPoA
IPoA allows IP packets directly over the ADSL physical link at high transmission rate.
To create an IPoA WAN connection, select the IPoA option from the ATM mode list (see
Figure 4-4), and then click to enter the page as below.
Figure 4-6 IPoA
Table 4-2 Description of the IPoA items
Item Description
Description Type in the distinctive description on this service.
VPI Type in the VPI value provided by your ISP.
VCI Type in the VCI value provided by your ISP.
Encapsulation
method
Select the packet encapsulation method according to your
ISP, LLC/SNAP or VcMux, from the drop-down lastly/SNAP
is usually selected.
WAN IP Address Type in the static IP address provided by your ISP.
Subnet Mask Type in the subnet mask provided by your ISP.
Enable NAT on this
interface
Select this check box to enable NAT. With it, SOHO users
can make multiple hosts access network via a public IP
address.
Click after the configuration is complete.
3) PPPoA
To create a PPPoA WAN connection, select the PPPoA option from the ATM mode list
(see Figure 4-4), and then click to enter the page as below.