Huawei DR814Q User Manual

Page 35

User Manual
Aolynk DR814Q ADSL2+ Broadband Router

4 Web-based Basic Configuration

Figure 4-24 Set a DHCP server

To modify the IP address of the DHCP server in the list, modify it directly in the field and

then click .

To delete the existing DHCP server, select the corresponding [Delete?] check box and

then click .

III. Enable/disable DHCP relay

You need to enable the DHCP relay function after the configuration is complete. The

functions of DHCP server and DHCP relay of the DR814Q cannot be enabled

concurrently. By default, you cannot enable the DHCP relay because the DHCP server

is already enabled. The prompt is display as shown in Figure 4-21.

Click on the above page (see Figure 4-24) to enter the DHCP server

page, click and thus appears on the page (see Figure 4-25). If the

DHCP relay is disabled currently, you can click to enable it. Conversely, click

to disable it.

Figure 4-25 Enable/disable the DHCP relay