Huawei DR814Q User Manual
Page 54
User Manual
Aolynk DR814Q ADSL2+ Broadband Router
5 Advanced Configuration
49
Figure 5-7 Add a security interface
I. Security state
To enable/disable the security function, select the corresponding Enabled/Disabled
option, and then click
Likewise, such operation can also be used to enable/disable the firewall and intrusion
detection.
Caution:
z
You can enable the firewall, intrusion detection and NAT only when the security
function is enabled.
z
If the security function is disabled, the firewall, intrusion detection and NAT are also
necessarily disabled.
II. Security level
After the firewall is enabled, the [Security Level] drop-down list appears in the [Security
Level] section as below.