Huawei DR814Q - Manual (Page 79)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
5 Advanced Configuration
74
WAN:192.200.200.81/24
DR814Q
BAS
Router
DSLAM
Switch
WAN:192.200.200.10/24
LAN2:16.0.0.0/4
192.200.200. 1/24
LAN1:192.168.1.0/24
WAN:192.200.200.81/24
DR814Q
BAS
Router
DSLAM
Switch
WAN:192.200.200.10/24
LAN2:16.0.0.0/4
192.200.200. 1/24
LAN1:192.168.1.0/24
Figure 5-38 Network diagram for the static route configuration
In Figure 5-38, suppose that a DHCP service is configured for the DR814Q, the
gateway address is 192.200.200.1, and there is a default route to broadband access
server (BAS).A router is connected to another network segment, LAN2 (16.0.0.0/4), on
the WAN side, and the IP address of the WAN port is 192.200.200.81.To make hosts in
LAN1 access hosts in LAN2 normally, you need to create a route as below so that the
DR814Q can choose routes for packets correctly.
Figure 5-39 Example of the static route configuration
5.5 Service
Two tabs, SNTP and ZIPB, are available on the [Service] page. Click any tab to enter
the corresponding configuration page.