Huawei DR814Q - Manual (Page 50)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
5 Advanced Configuration
45
Figure 5-3 Set the PPPoE authentication information
4) It takes about two minutes for your settings to take effect. Figure 5-4 depicts these
settings. Actual configuration on the WAN connections page Click in the
navigation bar to bring up the [Status] page as shown in Figure 4-38. You can find
that the WAN IP Address item is a public IP address instead of the original one
0.0.0.0. Then you can access the Internet through a PC connected to the LAN4
port.
Figure 5-4 Actual settings on the Status page
5) Verify the binding of the LAN ports to the PVCs. Connect a PC which is configured
to obtain an IP address automatically to the LAN1 port. You can then access the
IPTV Website of your ISP. Similarly, connect PCs to the LAN2 and LAN3 ports and
access the Internet by PPPoE connection. After you enter the user name and
password, the PC can obtain an IP address quickly and set up a connection with
the Website.