Enterasys Networks 700 - Manual (Page 93)

Managing the Module 2-73
The MultiSwitch 700 Device View
Figure 2-29. The Device Time Window
3. Enter the new time in a 24-hour hh:mm:ss format, either by highlighting the
field you wish to change and using the up and down arrow buttons, or by
entering the new value in the appropriate field.
4. Click OK to save your changes, or Cancel to exit without saving changes.
To edit the device date:
1. Click on Device on the Device View menu bar to access the Device menu.
1. Select Edit Device Date. The Device Date change window, Figure 2-30 ,
opens.
Figure 2-30. The Device Date Window
2. Enter the new date in a mm/dd/yyyy format, either by highlighting the field you
wish to change and using the up and down arrow buttons, or by entering the
new value in the appropriate field.
3. Click OK to save your changes, or Cancel to exit without saving changes.