Enterasys Networks 700 - Manual (Page 142)

Alarm Configuration
4-26 Advanced Alarm Configuration
Deleting an Alarm, Event, or Action
To delete an alarm, event, or action:
1. In the appropriate window, highlight the alarm, event, or action you wish to
remove.
2. Click on the Delete button to remove. A window will appear asking you to
confirm your selection; click on the OK button to delete, or on the Cancel
button to cancel.
When you delete an event, be sure you edit all alarms that were pointing to that
event, and assign a new valid event to those thresholds; note, too, that deleting an
event automatically deletes its associated actions, as actions cannot exist in the
absence of an association with an event.
As a general rule, we recommend that you do not delete an alarm or event of
which you are not the owner.
Viewing an Advanced Alarm Event Log
To view the log of occurrences for any event:
1. Highlight the event for which you wish to view the log, then click on the
Event Log button at the bottom of the Advanced Alarm/Event List window;
the Event Log window,
Figure 4-7 , will appear.
Figure 4-7. The Event Log Window