Enterasys Networks 700 - Manual (Page 13)

Related Manuals 1-5
Introduction
monitoring the module’s system resources, finding a source address on the
module, establishing module-level port priorities, setting up broadcast
suppression on the device, and configuring the module’s front panel COM port
and any attached Uninterruptable Power Supply (UPS).
Also described in this chapter is the Device View functionality associated with the
DELHW-UA modular interface. Unlike other modular interfaces designed for the
MultiSwitch 700 boards, the DELHW-UA module functions as an independent
intelligent device with its own IP address. As such, it must be managed separately
from the MultiSwitch 700 chassis and the board on which it is installed.
Chapter 3, Statistics , describes the two statistics views available at the interface
level: MIB-II Interface statistics and RMON Ethernet statistics.
Chapter 4, Alarm Configuration , provides instructions for using both the Basic
and Advanced alarm applications to configure alarms and the events that notify
you that an alarm condition has occurred. The ability to automatically initiate a
SET or a series of SETs in response to an alarm — functionality provided by the
proprietary Actions MIB — is also described.
Chapter 5, FDDI Management , describes the Configuration, Connection Policy,
Station List, Performance, FDDI Statistics, and Frame Translation selections
available when a DELHF-UA module is installed.
Chapter 6, ATM Configuration , discusses the ATM Connections window which
will appear if you have a DELHA-UA module installed in your device.
Chapter 7, WAN Configuration , describes the physical configuration of the
DELHW-UA modular interface, including port interface module options, and
explains the WAN Logical View window and its functions.
Related Manuals
The MultiSwitch 700 Modules User’s Guide is only part of a complete document
set designed to provide comprehensive information about the features available
to you through NetSight Element Manager. Other guides which include
important information related to managing the
MultiSwitch 700 include:
SmartSwitch and MultiSwitch Chassis User’s Guide
User’s Guide
Tools Guide
Remote Administration Tools User’s Guide
NOTE
The SmartSwitch and MultiSwitch Chassis User’s Guide discusses how to
configure the MultiSwitch 700 chassis using the Chassis Setup view. It gives an overview
of MultiSwitch 700 management views and general module information, and discusses
changing the current view as well as the default view.