Figure 4-1 – Enterasys Networks 700 User Manual
Page 120
Alarm Configuration
4-4
Basic Alarm Configuration
Figure 4-1. RMON Basic Alarm Configuration Window
•
Total Errors
(ifInErrors) — tracks the number of error packets received by the
selected interface.
•
Broadcast/Multicast
(ifInNUcastPkts) — tracks the number of non-unicast —
that is, broadcast or multicast — packets received by the selected interface.
Port Number
Provides a sequential indexing of the interfaces installed in your RMON device.
IF Number
Displays the interface number assigned to each available interface.
TIP
The three pre-selected alarm variables are all MIB II variables; this allows you to configure
alarms for any installed interface — even those for which no specific RMON statistics
exist.