Enterasys Networks 700 - Manual (Page 153)

Viewing FDDI Information 5-9
FDDI Management
Station List
The Station List illustrates the configuration of the ring associated with the
currently selected SMT entity, including number of nodes on the ring, node
addresses (both Canonical and MAC), node class, and ring topology.
Figure 5-4. The Station List Window
The Station List provides the following information about the ring with which the
SMT is currently associated:
Number of Nodes
The number of stations inserted into the FDDI ring with which the SMT entity is
currently associated.
Address Mode
Displays the current mode being used to display the addresses of the devices in
the Station List. The two possible modes are Canonical (FDDI) or MAC (Ethernet).
To change the current Address Mode, click on the Address Mode button at the
bottom of the window. The current address mode will change in the Address
Mode field and the Stations panel.