Enterasys Networks 700 - Manual (Page 26)

The MultiSwitch 700 Device View
2-6 Viewing Device Information
DLM6C-AA Chassis-specific Information
The Device View provides the following information about the DLM6C-AA
chassis in which the MultiSwitch 700 module is installed. There are four
color-coded fields which provide status information for the operation of the
power supplies and fan tray installed in the DLM6C-AA chassis.
Power Redundancy
The DLM6C-AA supports two power supply modules. Each supports a separate
AC input connector, so that two separate power sources can be used for the
chassis. Additionally, with two power supplies installed, the total load presented
by the DLM6C-AA and its installed modules is split 50/50 between the supplies
(+/- 5%). The Power Redundancy field displays whether or not the chassis is
currently configured for load sharing and power redundancy. Possible values are:
• Available (Green) — Two HA-205-XX power supply modules are installed in
the DLM6C-AA chassis.
• Not Available (Yellow) — Only a single HA-205-XX power supply module is
installed in the DLM6C-AA chassis. Note that when only a single power
supply module is installed, it must always be in power slot 1 (PS1).
PS #1/#2 Status
Indicates the state of any power supplies installed in the DLM6C-AA Chassis.
Possible states returned are:
• Not Available (Yellow) — No response has been returned from the device
regarding the power supplies.
• Normal (Green) — A power supply is installed and operating in the associated
power slot.
• Fault (Red) — The power supply in the associated power slot is not
operational.
• Not Installed (Blue) — The indicated power slot is not occupied by a power
supply.
Fan Tray Status
The DLM6C-AA supports a single, removable fan tray that has four fans. The tray
is hot swappable, so it can be removed without powering down the chassis. This
field indicates the status of the DLM6C-AA’s Fan Tray:
• Not Available (Yellow) — No response has been returned regarding the fan
tray.
• Normal (Green) — A fan tray is installed and operational.
• Fault (Red) — One or more fans in the tray have failed.
• Not Installed (Blue) — The fan tray slot is not occupied. The chassis is in
danger of overheating if it continues to run without the fan tray installed.