Eicon Networks DIVA LAN ISDN - Manual (Page 99)

Chapter Seven: Setting up the Phone Ports Supplementary services 99
Call Transfer
Call Transfer allows you to disconnect from a Three-Way Conference call and leave the other two people
connected. It works as follows: Establish a Three-Way call as described in the section above. Hang up. The
other two people remain connected.
Feature Key values
To access calling features, the DIVA LAN ISDN Modem supplies the ISDN switch with certain codes called
Feature Keys. Not all ISDN providers use the same Feature Keys (unless you are using an EZ-ISDN or IOC
line). Ask your ISDN service provider for a list of Feature Key values that your DIVA LAN ISDN Modem
should use.
Note Some ISDN providers allow you to specify which Feature Key values you want to use. If this is the case,
you can supply the DIVA LAN ISDN Modem default values, and no further configuration is necessary. If your
ISDN provider supports user supplied Feature Key values, supply them with the values in the following table.
The default values for the DIVA LAN ISDN Modem are as follows:
If the Feature Key values supplied by your ISDN provider do not match, you must configure your DIVA LAN
ISDN Modem to use the proper values. The Feature Key values can only be changed via the CLI. See Chapter
Ten for details on how to use the CLI.
Feature Key Value
3-Way Conference 60
Call Drop 62
Message Waiting Indicator 63