Eicon Networks DIVA LAN ISDN - Manual (Page 174)

Appendix C: Command Line Reference General 174
General
MONITOR
Valid context: General
Invokes monitor mode. Use monitor mode to upload new firmware or to dump system memory for debugging
purposes. You can set the DIVA LAN ISDN Modem to automatically invoke monitor mode when a fatal error
occurs by issuing the SET ONERROR command.
NEXT
Valid context: Filter
Makes the next IP filter the current context so you can edit it.
PREVIOUS
Valid context: Filter
Makes the previous IP filter the current context so you can edit it.
PING Ipaddr [number] [size]
Valid context: General
Lets you determine if an IP address is reachable.
Ipaddr: IP address of device to PING.
number: Number of messages to send. Range: 1 to no limit. Default: 4
size: size of the message in bytes. Range: 1 to 1472. Default: 64
RESET [FACTORY | HUB]
Valid context: General
Resets the DIVA LAN ISDN Modem.
FACTORY: Resets the DIVA LAN ISDN Modem and returns all parameters to their factory default settings.
Deletes all user-defined profiles and the password.
HUB: Resets only the Ethernet ports.
LOGOUT
Valid context: General
Closes the current configuration session.
SET ONERROR {HALT | RESET}
Valid context: General
Defines how the DIVA LAN ISDN Modem reacts when it encounters a fatal error and cannot continue to
operate normally.
HALT: Activate monitor mode when a fatal error is encountered. The fault LED
will be lit.
RESET: Reset the system when fatal error is encountered.
SAVE [profileName]
Valid context: General
Saves the current configuration settings to non-volatile memory on the DIVA LAN ISDN Modem. If you do
not save your changes, they will be lost when you power-off or reset the DIVA LAN ISDN Modem.