Eicon Networks DIVA LAN ISDN - Manual (Page 186)

Appendix C: Command Line Reference ISDN 186
SET ISDN TEI {isdnTEI | DYNAMIC}
Valid context: General
Defines the TEI used by ISDN to support X.25 communications over the D-channel. This setting takes
precedence over TEI sharing (dynamic allocation).
isdnTEI: TEI number to assign to the D-channel for X.25. Your service provider will provide this value. Range:
1 to 127.
DYNAMIC: TEI number is negotiated with the ISDN switch and also allows TEIs to be shared (ENABLE
ISDN TEISHARING).
SET ISDN CALLTYPE {AUTO | 56K | DOV}
Valid context: Profile/PPP
Defines the ISDN call type for this profile.
56K: Transmit and receive at 56 kbps.
DOV: Establish all data calls as voice calls. Useful in areas where voice calls cost less than data calls.
Throughput is not affected.
AUTO: Transmit and receive at 64 kbps or 56 kbps.
ENABLE ISDN DELAY56K {DEFAULT | VALUE delay}
Valid context: General
An attempt is made to automatically re-establish a data call at 56 kbps if a data call attempt failed at 64 kbps
due to network congestion, or if a service or option was not available or not configured.
DEFAULT: Immediately try to connect at 56 kbps if a call fails at 64 kbps. In Australia and Japan, do not retry.
VALUE delay: Specifies how long to wait before retrying. Range 0 to 10 seconds., 254 (use pre-configured
values depending on region), 255 (no retry).
DISABLE ISDN DELAY56K
Valid context: General
SHOW ISDN STATISTICS
Valid context: General
Displays statistics for the two ISDN channels.
SHOW ISDN STATUS
Valid context: General
Displays ISDN status information.
SHOW ISDN CONFIGURATION
Valid context: General
Displays ISDN configuration information.