Ip routing – Eicon Networks DIVA LAN ISDN User Manual
Page 181

Appendix C: Command Line Reference
IP routing
181
IP routing
ADD IP ROUTE Ipaddr maskLen[:metric] [gwAddr]
Valid context: Profile
Adds a static IP route.
Ipaddr: Specifies the IP address of datagrams that should be routed.
maskLen: Lets you specify the number of bits that are checked when comparing the address of a datagram to
that specified by the lpaddr parameter. Range: 0 to 32.
metric:Metric determines the weight of a route. If two identical routes exist, then the DIVA LAN ISDN Modem
uses the route with the lower metric. Default value: 1 Range: 1 - 15, 16 (never use this route).
gwAddr: Specifies the IP address of the device to forward datagrams to if a
match is found.
DELETE IP ROUTE Ipaddr
Valid context: General
Deletes an IP route.
Ipaddr: Address of the IP route to delete.
SET IP ROUTE Ipaddr maskLen [gwAddr]
Valid context: General
Modifies the mask and gateway address for an existing IP route. See ADD IP ROUTE for more information.
Ipaddr: The IP address of the existing route to change.
maskLen: New setting for mask length. Range: 0 to 32
gwAddr: New setting for gateway address.
SHOW IP ROUTE
Valid context: General
Displays all defined static and dynamic IP routes.