Eicon Networks DIVA LAN ISDN - Manual (Page 159)

Appendix B: Technical Information DIVA LAN ISDN Modem connectors 159
DIVA LAN ISDN Modem connectors
The back panel is where you connect your equipment to the DIVA LAN ISDN Modem.
Port Description
ISDN Use this RJ-45 port to connect the DIVA LAN ISDN Modem to the ISDN line jack. An RJ-45
to RJ-11 cable is included for this purpose.
Phone 1, 2 Use these RJ-11 ports to connect analog devices such as telephones or fax machines.
Ethernet
E1, E2, E3, E4 Use these RJ-45 ports to connect the Ethernet cables for up to four computers. An RJ-45 to
RJ-45 cable is supplied so you can connect one computer to configure the DIVA LAN ISDN
Modem.
CONSOLE If you do not have an Ethernet card, you can use this port to configure the DIVA LAN ISDN
Modem. A special cable is included that lets you connect this RJ-45 port to a DB-9 serial port
on a computer.
RESET Press this button to re-initialize the DIVA LAN ISDN Modem.
POWER 12VDC Use this jack to connect the supplied AC adapter.
ISDN
PHONE ETHERNET
1 2 E4 E3 E2 E1 CONSOLE
POWER
12VDC
Reset