Eicon Networks DIVA LAN ISDN - Manual (Page 185)

Appendix C: Command Line Reference ISDN 185
SET ISDN REMOTE channel isdnNumber
Valid context: Profile/PPP
Sets the remote ISDN numbers the DIVA LAN ISDN Modem should dial when making calls for this profile.
channel: ISDN channel. Range: 1 to 2.
isdnNumber: ISDN number.
SET ISDN BACKUP channel isdnNumber
Valid context: Profile/PPP
Sets the remote backup ISDN numbers the DIVA LAN ISDN Modem should dial when the remote numbers
failed to connect.
channel: ISDN channel. Range: 1 to 2.
isdnNumber: ISDN number.
DETECT ISDN SPID
Valid context: General
Before you use this command you must define the telephone number for each ISDN channel. The DIVA LAN
ISDN Modem uses these telephone numbers to determine the SPID assigned to each channel.
SET ISDN SPID channel spid
Valid context: General
Service Profile Identifiers are defined by your ISDN provider to identifyyour ISDN equipment to the ISDN
switch. If your line supports AutoSPID,the DIVA LAN ISDN Modem automatically detects your SPIDs.
channel: First or second SPID. Range: 1 to 2.
spid: SPID number to assign. Range: 1 to 32 digits.
SET ISDN SWITCH {NI1 | 5ESS | AUTO | 5ESSPP}
Valid context: General
Specifies the type of ISDN switch used by your ISDN service provider.
NI1: National ISDN-1 switch.
5ESS: AT&T 5ESS switch.
5ESSPP: AT&T 5ESS switch/Point to Point. This setting does not require SPIDs.
AUTO: The DIVA LAN ISDN Modem automatically detects the switch type in use.
SET ISDN SWITCH {JATE | EURO | BT | TPH | CHINA | SINGAPORE}
Valid context: General
Specifies the type of ISDN switch used by your ISDN service provider.
EURO: Euro-ISDN
TPH: Microlink (TPH1962/TS013)
JATE: INS-Net64 (Japan)
BT: British Telecom