Problems with wireless features – Canon EOS Rebel SL3 DSLR Camera with 18-55mm Lens (Black) User Manual
Page 471
471
The subject looks distorted during movie shooting.
z
If you move the camera to the left or right or shoot a moving subject,
the image may look distorted.
The image flickers or horizontal stripes appear during movie
shooting.
z
Flickering, horizontal stripes (noise), or irregular exposures can be
caused by fluorescent lighting, LED lighting, or other light sources
during movie shooting. Also, changes in the exposure (brightness) or
color tone may be recorded. Note that in the <
a
> mode, a slow shutter
speed may reduce the problem.
Problems with Wireless Features
Cannot pair with a smartphone.
z
Use a smartphone compliant with Bluetooth Specification Version 4.1
or later.
z
Turn on Bluetooth from the smartphone settings screen.
z
Pairing with the camera is not possible from the smartphone’s Bluetooth
settings screen. Install the dedicated app Camera Connect (free of
z
A previously paired smartphone cannot be paired with the camera
again if the camera’s registration is retained on the smartphone. In
this case, remove the camera’s registration retained in the Bluetooth
settings on the smartphone and try pairing again (
Wi-Fi function cannot be set.
z
If the camera is connected to a computer or another device with an
interface cable, Wi-Fi functions cannot be set. Disconnect the interface
cable before setting any functions (
A device connected with an interface cable cannot be used.
z
Other devices, such as computers, cannot be used with the camera by
connecting them with an interface cable while the camera is connected
to devices via Wi-Fi. Terminate the Wi-Fi connection before connecting
the interface cable.