Selecting a folder – Canon EOS Rebel SL3 DSLR Camera with 18-55mm Lens (Black) User Manual
Page 264
264
Selecting a Folder
z
With the folder selection screen
displayed, select a folder and press
<
0
>.
B
The folder where the captured images
will be saved is selected.
z
Subsequently captured images will be
recorded into the selected folder.
(1) Number of images in folder
(2) Lowest file number
(3) Folder name
(4) Highest file number
Folders
z
As with “
100CANON
” for example, the folder name starts with three digits (the
folder number) followed by five alphanumeric characters. A folder can contain
up to 9999 images (file number 0001 - 9999). When a folder becomes full, a
new folder with the folder number increased by one is created automatically.
Also, if manual reset (
267) is executed, a new folder will be created
automatically. Folders numbered from 100 to 999 can be created.
Creating Folders with a Computer
z
With the card open on the screen, create a new folder named “
DCIM
”. Open
the DCIM folder and create as many folders as necessary to save and
organize your images. The folder name must follow the format “
100ABC_D
”.
The first three digits are always the folder number from 100 to 999. The last
five characters can be any combination of upper- and lower-case letters from
A to Z, numerals, and the underscore “_”. The space cannot be used. Also
note that two folder names cannot share the same three-digit folder number
(for example, “100ABC_D” and “100W_XYZ”), even if the last five characters
in each name are different.
(3)
(1)
(4)
(2)