Canon EOS Rebel SL3 DSLR Camera with 18-55mm Lens (Black) - Manual (Page 419)

419
Geotagging Images with GPS
Information from Other Devices
You can geotag images with GPS Receiver GP-E2 (sold separately) or a
Bluetooth enabled smartphone.
GP-E2
1
Attach the GP-E2 to the camera.
z Attach GP-E2 to the camera’s hot shoe
and turn it on. For details, refer to the
GP-E2 Instruction Manual.
2
Select [GPS device settings].
z Under the [
k
] tab, select [GPS device
settings] , then press < 0 >.
3
In [Select GPS device], select [GPS
receiver].
4
Take the picture.
z For the details of [Set up] , refer to the
GP-E2 Instruction Manual.
Cautions for Using GP-E2
z At first, check the countries and regions where the use of GPS is allowed, and
follow their legal restrictions.
z Update the GP-E2 firmware to Version 2.0.0 or later. Firmware updating
requires an interface cable. For how to update the GP-E2 firmware, refer to
the Canon Web site.
z The cable cannot be used to connect the camera to the GP-E2.
z The camera does not record the shooting direction.