Canon EOS Rebel SL3 DSLR Camera with 18-55mm Lens (Black) - Manual (Page 429)

429
11: Connection target not found
z In the case of [
q
] , is Camera Connect running?
B Establish a connection using Camera Connect ( = 360).
z In the case of [ D ] , is the EOS software running?
B Start the EOS software and reestablish the connection ( = 376).
z In the case of [ l ] , is the power of the printer on?
B Turn on the printer.
z Are the camera and the access point set to use the same password for
authentication?
B This error occurs if the passwords do not match when the
authentication method for encryption is set to [Open system] .
The setting is case-sensitive, so check upper- and lower-case
characters. Make sure that the correct password for authentication is
set on the camera ( = 427).
12: Connection target not found
z Is the power of the target device and access point on?
B Turn on the target device and access point, then wait a while. If a
connection still cannot be established, perform the procedures to
establish the connection again.