116 faq – Canon EOS Rebel SL3 DSLR Camera with 18-55mm Lens (Black) User Manual
Page 116
116
FAQ
z
I want to select the image-recording quality matching the paper
size for printing.
Paper size
Refer to the diagram on the left
when choosing the image-recording
quality. If you want to crop the image,
selecting a higher quality (more pixels)
such as
73
,
83
,
1
, or
D
is
recommended.
b
is suitable for playing back the
image with a digital photo frame.
z
What’s the difference between
7
and
8
?
These settings indicate the different levels of image quality caused by
different compression rates. The
7
setting produces a higher image
quality with the same number of pixels. Although
8
produces a slightly
lower image quality, this allows more images to be saved on the card.
b
will be in
7
(Fine) quality.
z
I was able to take more shots than the number of possible shots
indicated.
Depending on the shooting conditions, you may be able to take more
shots than is indicated. On the contrary, it may also be fewer than
indicated. The number of possible shots displayed is only approximate.
z
Does the camera display the maximum burst?
The maximum burst is displayed on the viewfinder’s right side. Since
it is only a single-digit indicator
0 - 9
, any number higher than 8 will be
displayed only as “
9
”. Note that this number will also be displayed even
when no card is installed in the camera. Be careful not to shoot without
a card in the camera.
z
When should I use
1
or
D
?
1
and
D
images must be processed on a computer. For details,
see “RAW Images and JPEG Images” (
12.7x8.9 cm/5.0x3.5 in.
A4 (29.7x21 cm/11.7x8.3 in.)
A3 (42x29.7 cm/16.5x11.7 in.)
A2 (59.4x42 cm/23.4x16.5 in.)